Vortex Conical Screw Mixer is ideal for powder blending

Ask An Expert

Step 1. Contact Info

Step 2. Material Info

Contact *

Phone Number

E-mail *

Company Name

Country

Previous Step

Description your process/requirements *

Names of Mixing Materials: *

Batch Mixing Weight: *

Contact Parts Materials:

Bulk density of Mixed Materials: *

Electricity Condition: *

Non-contact Parts Materials:

Thank you for your message. It has been sent.

There was an error trying to send your message. Please try again later.

Frequently Asked Questions

Do you manufacture controls for your mixers?vortexmixer2021-10-18T15:42:51+08:00

Do you manufacture controls for your mixers?

Yes, We can supply simple stand alone panels or automated PLC controlled systems. We normally install and test all controls on our mixers before they are shipped.

Is the your mixer machine easy to install?vortexmixer2021-10-18T15:40:34+08:00

Is the your mixer machine easy to install?

Yes, we normally test the mixers before they are shipped and mark out the wire need to connect on the control box.

What types of mixing equipment does the company specialize in?vortexmixer2021-10-18T15:36:40+08:00

What types of mixing equipment does the company specialize in?

We manufacture specialty mixing equipment for powder & bulk materials. Included are ribbon blender, plough mixer, conical screw mixer, twin shaft paddle mixer, V blender, double cone blender and other auxiliary equipment such as screw conveyor, quantitive auger filler.

Do you sell to our country?vortexmixer2021-10-18T15:31:19+08:00

Do you sell to our country?

We sell across the world, our cusotmers distribute 5 continents.

Vortex conical screw mixers are ideal for low shear blending of powders, pellets, granules, fibers and other solids. These blenders feature an auger that turns on its own axis and a mechanical arm that rotates the auger around the conical vessel. The mixing action in conical screw blender is far gentle than that of ribbon, paddle or other horizontal blenders, making it more suitable for delicate and abrasive applications. Spray nozzles may be installed for liquid additions and coating purpose.

Conical screw mixers are also commonly used in vacuum drying operations and can accommodate a wide range of feed forms including slurries, wet cakes, pastes and flowable solids. Requiring only low heat to drive off moisture or solvents, vacuum drying in a conical screw mixer is an excellent method for drying heat-sensitive materials without fear of thermal degradation. Other processing advantages include low energy consumption, fast drying rates and effective solvent recovery.

An important design feature of conical screw mixer is the absence of a bottom support bearing which facilitates complete discharge of mixing materials, simplifies cleaning of vessel and lowers the risk of batch-to batch contamination. This design also allows the machine to be operated with very little maintenance. Vortex company provide conical screw mixer with capacity from 50L to 10000L.

Pictured is 2000L jacket conical vacuum dryer. It is equipped with a stainless steel 304 jacket and Siemens motors and reducer to drive the screw shafts and screws. This is for one of customer to dry the olive pomace.

For more information on Vortex conical screw blenders or other blenders, please feel free to visit our website: www.incmachine.com or email to [email protected] to discuss with our sales engineers for your specialty applications.