vortex logo

vortexmixer

About vortexmixer

This author has not yet filled in any details.
So far vortexmixer has created 191 blog entries.

Ribbon blender dryer for tapioca powder

Vortex developed VRB-10000L ribbon blender dryer with heat jacket to realize drying purpose. Indonesian client successfully installed the whole system, and dry the native tapioca powder from 50% moisture content to 5% moisture content. Background: In 2019, a company in Indonesia found vortex to seek a kind of dryer, they also need to add

By |2022-10-21T18:30:19+08:00October 11th, 2021|News|Comments Off on Ribbon blender dryer for tapioca powder

Indonesia customer purchased 6000L ribbon mixer

PT. KIMIA KONSTRUKSI INDONESIA is a company engaged in the distribution and application of construction chemical materials and have won the trust of many large local and foreign companies to supply materials or application services or material pairs throughout Indonesia. Their specialization is: WATERPROOFING ALL SYSTEM WATERSTOP GROUTING INJECTION CARBONWRAP STRENGTHENING EPOXY PROTECTIVE COATING

By |2022-10-20T17:50:36+08:00April 15th, 2021|Glass, Cements, Ceramics and Metals, News|Comments Off on Indonesia customer purchased 6000L ribbon mixer

How to Prevent Agglomeration during Mixing

When the topic of agglomeration comes up, it’s natural to think first of the unit operation of size enlargement— causing particles to adhere to each other — and the benefits this process provides for many dry bulk products. Yet agglomeration isn’t always a positive thing. Unwanted agglomeration is a natural phenomenon that can occur under

By |2023-06-01T09:50:41+08:00September 25th, 2019|Horizontal Mixer, Mixer knowledge|Comments Off on How to Prevent Agglomeration during Mixing

Chemical Company in Indonesia purchased 500L ribbon mixer

PT. Luas Birus Utama established to be problem solving company with core capability not limited in chemical services, but also been extended to engineering services, manpower supply, and also mechanical deliverables. Bringing Starborn Chemical brand, they developed specialty chemical for Oil & Gas Production Treating, Water & Waste Water Treatment, Pulp & Paper as

By |2022-12-07T14:33:56+08:00September 17th, 2019|Mixer knowledge|Comments Off on Chemical Company in Indonesia purchased 500L ribbon mixer

King Abdullah University of Science and Technology in Saudi Arabia purchased Ribbon Mixer

King Abdullah University of Science and Technology (KAUST) advances science and technology through distinctive and collaborative research integrated with graduate education. They are a catalyst for innovation, economic development and social prosperity in Saudi Arabia and the world They exist for the pursuit and advancement of scientific knowledge and its broad dissemination and benevolent

By |2023-06-01T09:52:31+08:00September 10th, 2019|Animal Feed, News|Comments Off on King Abdullah University of Science and Technology in Saudi Arabia purchased Ribbon Mixer

New Ways to Improve Ribbon Blender Efficiency

Across the process industries, a wide range of powder blends are produced in a ubiquitous workhorse that is the ribbon blender. From seasonings and beverage mixes to pharmaceutical, chemical, plastic, and agricultural powders, a reliable method for solid-solid blending is at the core of production and the ribbon blender is a popular choice due to

By |2023-06-01T10:02:10+08:00September 1st, 2019|Mixer knowledge|Comments Off on New Ways to Improve Ribbon Blender Efficiency

Azomin Australia purchased 2000L paddle-ribbon mixer

Greg’s company has purchased many mixers including 5 sets ribbon mixer, 3 sets conical screw mixer and 2 sets plough mixer. In May 2018, Mr. Greg in Azomin contact us and said that his company need a kind of mixer to mix very dense materials, the main ingredients is PbO which bulk density is

By |2022-11-10T17:10:54+08:00August 29th, 2019|Chemical mixing machine, News|Comments Off on Azomin Australia purchased 2000L paddle-ribbon mixer

Bulk and Tapped Density of Mixture

Introduction to Bulk and Tapped Density The bulk density of a material is the ratio of the mass to the volume (including the interparticulate void volume) of an untapped powder sample. The tapped density is obtained by mechanically tapping a graduated cylinder containing the sample until little further volume change is observed. Instrument and measuring

By |2022-10-14T17:13:45+08:00July 17th, 2018|Mixer knowledge|Comments Off on Bulk and Tapped Density of Mixture

Ideal Design of Mixing Equipment for Vacuum Drying

Vortex conical screw blender/dryer are ideal design for vacuum drying with a wide range of applications in both solid and liquid forms, such as powders, pellets, granules, fibers, slurries, pastes and etc. Conical screw vacuum drying blender features of a gentle-action auger screw that gently lifts batch materials updates as batch materials orbit around the

By |2023-02-26T16:45:34+08:00June 21st, 2018|Mixer knowledge|Comments Off on Ideal Design of Mixing Equipment for Vacuum Drying

The key to well-blended mixtures

The segregation is one of the three key issues facing those that handle powders. It is responsible for unscheduled downtimes due to quality issues. The mitigation of segregation is a primary objective when handling mixtures and blends. Segregation is a mechanistic phenomenon.For example, fine particles may sift down through a matrix of coarse particles, resulting

By |2022-12-07T16:40:34+08:00June 20th, 2018|Mixer knowledge|Comments Off on The key to well-blended mixtures
Go to Top