vortex blender

August 2015

GMP standard Conical Screw Mixer attracts Nutrition manufacturer

By |2023-01-11T16:06:04+08:00August 4th, 2015|Mixer knowledge, Pharmaceuticals & medical supplies|

Vincent Campbell plans to establish a new product line for his chemical factory coming out in 2016. His research team spent the last 3 months for their new product which Vincent believed to be something to rock the market. However, they do have a problem needed to be solved right away. They need to mix

Comments Off on GMP standard Conical Screw Mixer attracts Nutrition manufacturer

November 2014

Pharmaceutical Powder Mixing Process:Ribbon Mixer, Plough Shear Mixer

By |2023-05-04T11:29:20+08:00November 3rd, 2014|Mixer knowledge, Pharmaceuticals & medical supplies|

INTRODUCTION:Over recent decades the pharmaceutical processing has undergone a rapid transition from being a “processing art” to “processing science”. This has been possible due to increasing understanding of processing parameters, better manufacturing equipment and stricter regulatory requirements. Optimum mixing is a prerequisite for manufacturing of all solid dosage forms which involves powder mixing and it

Comments Off on Pharmaceutical Powder Mixing Process:Ribbon Mixer, Plough Shear Mixer

October 2014

Powder Ribbon Mixer for GMP standard

By |2023-05-15T10:56:34+08:00October 21st, 2014|Mixer knowledge, Pharmaceuticals & medical supplies|

The Sanitary Mixers (i.e. ribbon blender, vertical ribbon mixer, plough mixer, double cone mixer) are all manufactured in type 316 stainless steel and are polished to a 320 grit finish with no cracks or crevices to trap product to enable easy cleaning between batches. Agitators and shaft assemblies are designed and constructed with generous radius

Comments Off on Powder Ribbon Mixer for GMP standard

September 2013

Recommended Blending Equipment for Nutraceuticals

By |2013-09-24T16:02:47+08:00September 24th, 2013|Mixer knowledge, Pharmaceuticals & medical supplies|

Application Summary: Nutraceuticals are supplied in many forms including tablets, capsules, drink mixes and powders. Faced with an increasing demand for higher processing standards, nutraceutical companies are intensifyinng efforts on diligent equipment selection and good manufacturing practices. One of the key considerations is proper blending of the active ingredient(s), excipients, fillers, flavors, colors, lubricants and

Comments Off on Recommended Blending Equipment for Nutraceuticals

September 2011

Pharmaceuticals & Medical supplies

By |2022-12-05T17:19:48+08:00September 24th, 2011|Mixer knowledge, Pharmaceuticals & medical supplies|

• Antacid Powder Blends - containing sodium bicarbonate, sodium carbonate, citric acid and flavors are blended in large capacity Ribbon Blenders.• Bioadhesives -bioadhesive dosage forms, such as laminated polymer films, mucoadhesive tablets and patches, are continually being investigated for drug delivery. The VersaMix with SLIM System has successfully been tested for preparing mucoadhsive formulations containing

Comments Off on Pharmaceuticals & Medical supplies
Go to Top